Sunday, January 26, 2014

ID Report 1: Improving Inferencing





Report 1: Improvement of Inferencing ID Project

EME6609: Instructional Design

University of Florida

Spring 2014



Project Description
The purpose of this project is to find a way to improve my third grade students skill of inferencing. Twice each school year, students in each grade are given a benchmark or TEKS test (TEKS are the Texas State Standards set the Texas department of education). The students are tested in the following subject areas: math, reading and science. They are tested on all the content they have learned (and some that has not yet been covered) from the beginning of the year up until the time the tests is administered. Students in my class took their first benchmark this year in November. Once teachers have received the data back from these tests, the data must be analyzed, and plans made to revise our teaching of skills which they seem to be struggling with. This new plan is created and carried out until the next benchmark is taken, after which we go through the process again.
Once the data for the Reading tests was analyzed, I decided to focus in on the skill of inferencing. The TEK, 3.8 says “students understand, make inferences and draw conclusions about the structure and elements of fiction and provide evidence from text to support their understanding.” When looking at the questions and percentage scored correctly, the results were not nearly as high as I would have hoped. See Table Below  

Benchmark test questions related to TEK 3.8
Question #
1
3
5
10
16
Percentage Correct
55%
18%
55%
45%
18%

I looked over the students recent reading tests (Dibels, and SRI (Scholastic Reading Inventory)) as a way to find any possible correlations in the students Reading benchmark scores. The Dibels test requires them to read as much of a grade level passage of they can in one minute, and then orally answer two or three comprehension questions. From this test a word per minute and comprehension score are given. The SRI test consist of several passages which students read on the computer. Similar to DIBELS, after they read each passage, they must answer a few comprehension questions; the difference is that they are not timed while reading these passages. Based on their correct answers to each set of questions, the next passage will either be easier or more difficult. After completing the question and answer process for five stories, students are given a Lexile score.
Students take these assessment three times per year that allow myself, the students and their parents to know what their current reading level is based on a Lexile score. In third grade students reading on grade level should have an SRI score of from 250 to a 500 to be at basic level, 500 – 800 to be proficient, and an 800 and above is considered advanced for our grade level. When reviewing the data from their recent January SRI scores, 6 of my students were below basic (they scored anywhere from a 0 to a 150), 5 of my students were basic (they were in the 150 to 250 range). After this information into account, I was led to understand why the general tests scores on the Reading benchmark test were no where near where we expected them to be. On a more positive note, I did have 7 students score proficient and 3 which scored in the advanced level on their SRI tests. This data showed me that this select group of students are capable of scoring well on the test, but something is halting the achievement.  
            When it comes to analyzing the learners of the given group, the accommodations offered or not offered in some cases play a huge factor in their success as well. As a teacher it my our job to work around these accommodations and try to provide each learner with the least restrictive environment. I do have one student in my class who is taken out each day for Special Education services, as well as three others who leave the class during instruction time for ESL (English as a Second Language) services. I also have three students which I am trying to currently get tested as a means of giving them any accommodations which can be made available. This process can be very time consuming, which means that for now they must do their best with the few adjustments that I can make for them in the general education setting.

Needs Assessment
            The first step of a needs assessment is the planning phase. This assessment was a comparative needs assessment. Using the data, reviewers were able to compare schools within our district to one another based on student performance. The data is intended to now drive our instruction deeper so that our students will be prepared for the STAAR when it is facilitated in April.
The assessment was created by the Richardson Independent School District as a means of assessment abilities of third grade students from the start of the school year until November of the same year. The target audience ranged in many ways including those of varying SES, background experience, cultural groups and ethnicities. All of these factors play a part in the success of an individual student. The participants were all third grade students in general education classrooms, even if they receive pull out accommodations for the tests, they were still required to take it. The questions were made with the Common Core curriculum (which other states use as their assessment measure) as well as the STAAR test (the states standardized test students take (starting in third grade) questions in mind. The goal was for the test questions to be equivalent to or more difficult than ones they will encounter on those state tests. Data in this assessment was done through means of a “paper pencil” test. Student read short stories, and then answered various multiple-choice questions on a bubble sheet about these stories which tested them on several skills which they have learned. These skills range from inferencing, sequencing and summarizing to vocabulary knowledge.  
Students are given two and a half hours to complete the benchmark test. The students are not allowed to talk or ask for help during this time, it is expected that they do it completely independent. Once scores have been posted, teachers must take the given data and begin to analyze it. There are various data sheets, which allow teachers and principals to view the data many different ways. We are able to compare our individual questions to others on the test of the same type, individual student scores to one another, our entire class to others in the school and our schools’ data to other schools in the district.
            The students in my class struggled with this needs assessment. They scored poorly on many of the skills tested. When reviewing the test data, the areas in which my students scored lowest were identification of the main idea and details, making inferences, context clues and drawing conclusions.  See Table Below


Question #
What skill is the question testing?
Percentage Correct
#9
Drawing Conclusions
37%
#12
Identify details or facts that support the main idea
23%
#3
Make inferences and draw conclusions about structural elements of fiction; use textual evidence to support.
18%
#14
Use context clues to determine word meaning.
46%

Once the data for the Reading tests were analyzed, I decided to focus in on the skill which they had the most difficulty with which was inferencing. The TEK, 3.8 says “Students understand, make inferences and draw conclusions about the structure and elements of fiction and provide evidence from text to support their understanding.” When looking at the questions and percentage scored correctly, the results were not nearly as high as I would have hoped. (see table below)

Benchmark test questions related to TEK 3.8
Question #
1
3
5
10
16
Percentage Correct
55%
18%
55%
45%
18%

Goal Statement
            Based on the results of the benchmark test, I felt that my students would best benefit from additional instruction on the skill and strategies of inferencing. I will integrate this skill into small and whole group activities, stations, as well as independent work. The ultimate goal is that students will be able to read a given passage and independently answer inferencing questions correctly by applying taught strategies.

Entry Competencies
            In order to be able to master the skill of inferring, students need to have several pieces of background knowledge already established. The ability to read at or above grade level is the most basic necessity. They should have a wealth of background information and prior experiences to base inferences off of. They should also be able to grasp the general meaning of a given text that is written at or just above grade level. Students should bring a since of pride and motivation when it comes to succeeding, otherwise they might shut down when things get difficult. Because inferring is such a difficult skill and can be applied in so many different situations, it is important that they have a hard work initiative. Sometimes the inferencing process can take a while based on the fact that students have to dig deep to create connections with their background knowledge and experiences.  

Learner Interview
            After the needs assessment took place, I was able to meet with several of my students in a small group discussion setting. We discussed the above mentioned inferencing questions which they struggled with on the test. I was able to get feedback from them, as well as share my thoughts during this time. There were many answers given during the discussion which shed more light in to their reasoning for choosing the answers they did. Some started by explaining to me that they were tired about halfway through the test. Benchmark tests are taken by students in grades K-2 however that particular test is only given an hour time limit, whereas 3rd through 6th lasts for two hours. This was one big adjustment for them, especially because it was their first time taking this test; they also take one in the spring before their STAAR (state assessment) test in April. Starting in the third grade, students work on building their stamina which will enable them to stay alert and focused throughout the entire test, but it takes some time to get them there. Students also expressed difficulty in the passages they were given to read. The passages given in the third grade benchmark tests are generally written at a middle of third to a fourth grade reading level. As mentioned previously, many of my students are not able to read at grade level yet, especially at the beginning of the third grade. Another common response from students when asked about the inferencing questions was that they were not aware of or they forgot the strategy they were supposed to use when answering inferencing questions. The students were briefly taught this skill as it came up in our curriculum, however it was not something that our schools curriculum resource teachers (CRS’s) felt was something that needed a heavy focus at the time. Due to this fact, it is not surprising to me that they neglected to show the work that we would have preferred to see. After having this discussion time with my students I was able to see things from their point of view which was eye opening.

Description of the Learners
The individuals in my classroom are from a wide variety of ethnic backgrounds as well as socioeconomic statuses. Due to the diversity of my students some of them excel in new content areas while other lag behind. One reason this gap occurs is because of the lack of parent motivation in the home. In many cases this lack of motivation is due to the fact that their parents are either working all day or English is not their native language. This factor greatly affects student motivation and concern for whether they excel or not each year. In the beginning of the school year, students are motivated to do well, and have a true desire to succeed. For some of them, once November and December come and the content gets more and more difficult, start to get discouraged and slowly begin to give up. This quality is seen in a number of different ways, but it does occur for at least ¼ of the class at some point throughout the school year. It is highly possibly that this decrease in positivity and effort stems from the lack of parental support and encouragement in the home.
A large population at the school in which I teach is made up of immigrant students who are either constantly moving from one location to another or who have just moved here from another school (or country in some cases) and lack background knowledge that students who have been here all year have acquired. When students move from one school to another, no matter in the same district, state or even in the same country, it seems as though some of their previously gained knowledge does not make the transfer with them. Other times, students were being taught in classrooms with completely different curriculum, making what they have learned not in line at all to what the students in my classroom have learned. This too creates a lack of proper knowledge, which students really need in order for success to occur.



Learning Styles
            The students in my class come with numerous learning styles. At the beginning of the school year, I assessed the students to learn about their individual learning styles.  Students learning styles ranged from intrapersonal to musical to bodily kinesthetic. Though each of my students individually have their own learning styles, as a whole a majority of them are either bodily kinesthetic and need constant movement and hands on learning, or they tended to be interpersonal and get along well with other students. I have a few students who are more the intrapersonal type and tend to keep to themselves, rather than socialize with others when given a choice. I attempt to integrate all of their learning styles into my lessons by providing various types of activities and assignments.

Group Characteristics
            The students in my class range in age from eight to ten years of age. They are third grade students attending a Title I school. As mentioned previously, my students come from very diverse backgrounds that relate directly to the experiences that they may or may not have had as young children. These out of school experiences affect their understanding of various concepts and ideas which they learn about in class.

Performance Context and Implications for Instruction
            Our school is located in the small city of Richardson, TX located about twenty minutes north of Dallas, TX. There are around 700 students who attend our school, and we house Pre-K through sixth grade. Our school is located in a neighborhood, close enough to houses and apartment complexes that students are able to walk to school, or are dropped off rather than ride buses. The only buses we have are two day-care buses which take a small handful of kids to and from their afterschool program each day. A majority of our students walk from nearby subsidized apartment complexes. When looking at the make-up of the current student population, .6% are American Indian / Alaskan, 18.1% are Asian, 35.8% are Black / African American, 8.7% are White, 34.8% are Hispanic / Latino and 2% are more than one of the above listed ethnicities. Eighty percent of the students that attend our school get free or reduced lunch. In 2008-2009 and 2009-2010 school year our school was considered “Recognized” by the state of Texas, which is the highest ranking a school can received. Each year since we have been marked as “Met Standard.”
            Unfortunately uninvolved parents is a commonality at our school, and some of our students have difficulty attaining social skills that would be considered “normal” for their age. The district has adopted a social skills program which the teachers use in our classrooms each week called “R-Time.” R-Time’s aim is to develop positive relationships between children by creating a supportive, respectful environment encouraging good citizenship.
Our school has a wealth of resources; I will focus on specialists and technology. We have one math and three reading specialists at our school as well as a curriculum resource specialist who are available to all teachers when needed. The third grade has one reading specialist that plans with us each week and provides us with resources and ideas to use in areas that our students are struggling. After the benchmarks were complete and the data analysis began, our reading specialist was of great help and assistance. She helped us to look through the data to see what skills we could further integrate into our instruction in order to strengthen lower content areas.
In our classroom there are four companion computers, which are used in station time. If we do not have enough computers for a particular lesson or activity, we are able to borrow from other teachers who are not currently using theirs. They only issue related to these companions are that they sometimes do not work (they are quite old) and have difficulty staying charged when unplugged, limiting their portability. I also allow the students to utilize my personal IPad during small and independent instruction, particularly during reading stations. They are able to complete activities I have created for them on it, using the Explain Everything app (for example), or playing games on Spelling City. We most recently were given a MimioTeach through a Donors Choose project. The students are not able to use this independently, as I still do not feel them responsible enough, however they do use it in small groups when I am able to monitor them. All of these technologies are utilized in classroom instruction at various times throughout the day / week, and I feel they add to the engagement and motivation of students.
            Our school also has various after school activities available to the student, from tutoring each Monday from 3:00 until 4:30, to Saturday School each Saturday from 8:00 until 11:00AM. We also offer an after school program, PACE where students can stay until someone is able to pick them up. We also have a computer and a craft club available as well as band and chorus throughout the year as a means of enrichment. In the mornings before school begins we have a jogging club, and our school participates in a “Marathon Kids” program, which allows students to earn miles as they complete them; once they have reached 26 miles, they are rewarded with a shirt and they are invited to a celebration at the end of the year. Due to lack of parental support and guidance, our students must be extrinsically motivated to participate in various social activities. By having these programs available to them for free through the school they are provided with opportunities and encouragement that is might be lacking outside of school.

Resources 

Instructional design models and methods . (2012). Retrieved from http://www.instructionaldesigncentral.com/htm/IDC_instructionaldesignmodels.htm

Jill , D. (n.d.). Welcome to r-time . Retrieved from http://www.rtime.info/usa/

Kalman, H. K., Kemp, J. E., Morrison, G. R., Ross, S. M. (2011). Designing Effective Instruction (6th ed.). Hoboken, NJ; John Wiley and Sons Inc. 

Seddon, G. M. (1978). The properties of bloom's taxonomy of educational objectives for the cognitive domain .Review of Education Research 48(2), 303-323. Retrieved from http://ocw.metu.edu.tr/pluginfile.php/9012/mod_resource/content/1/1170087.pdf



Sunday, January 19, 2014

Instructional Design Model Review

Abstract


With regards to instructional design, there are many different models which have been developed. When searching for ID models that I felt best related to my career field, education, I found the Dick, Carey and Carey model as well as Blooms Taxonomy. Both of these instructional design models are made with the students interests ultimately in mind. Dick, Carey and Carey sought out to first find an instructional goal through the needs assessment; once that assessment is conducted it allows the designer to chose one area of weakness which is found through the data. The Blooms Taxonomy model is used as a way to improve student learning through higher level questioning. The model provides key words which educators use as a guide to create these questions which take student learning from basic memorization of content to analyzing and evaluation.

Click here for the document link 

_____________________________________________________________






Instructional Design Model Review

Bloom’s Taxonomy and Dick, Carey and Carey’s Instructional Design Models

Cassie D. Bell

University of Florida


Abstract

With regards to instructional design, there are many different models which have been developed. When searching for ID models that I felt best related to my career field, education, I found the Dick, Carey and Carey model as well as Blooms Taxonomy. Both of these instructional design models are made with the students interests ultimately in mind. Dick, Carey and Carey sought out to first find an instructional goal through the needs assessment; once that assessment is conducted it allows the designer to chose one area of weakness which is found through the data. The Blooms Taxonomy model is used as a way to improve student learning through higher level questioning. The model provides key words which educators use as a guide to create these questions which take student learning from basic memorization of content to analyzing and evaluation.

Dick and Carey’s Systematic Design of Instruction Model

Just before our holiday break my third grade students took three “benchmark” assessments, which tested them in the following subject areas: math, reading and science. They were tested on all the content they have learned (and some that has not yet been covered) thus far in the 2013-2014 school year. Once we returned to school the teachers were required to analyze the student tests from which we have began to create a new plan for teaching various strategies and skills which the students are still having difficulty with.
After researching some of the ID models available, I felt that the Dick and Carey model relates best to what my teammates and I are currently working through. In my research I learned that this particular model holds the connection to all of the various parts (such as the delivery system, instructional activities and the learners) at the utmost importance, which is something that directly relates to my profession and the effectiveness of my instruction.
The Dick, Carey and Carey model allows designers to create instructional products with limited focus. Because the process begins with a needs assessment, the focus of each step is limited to those few areas of weakness, which are determined by the initial assessment. Once the needs assessment has taken place, the assessment of learners and context occurs. It is now that the students are analyzed. Other models of instructional design, such as ADDIE, start out by first assessing the group of learners, the content and the connectivity between these two. It then moves into the design process in which goals and objectives are created as a way to solve the needs.
The best way to describe the ID strategy in my opinion is to relate the strategy to how I can apply it in my teaching life. As I go through each of the steps I have explained what I visualize it to be as well as the application of the step in my classroom.

Identify Instructional Goals
The first step to the Dick, Carey and Carey model is to identify instructional goal(s). The instructional goals for our students derive from the states standards (in Texas these are called TEKS) these standards tell the teachers, parents and students what skills the students are expected to grasp by the end of their current school year. The skill I am focusing on is that of inferencing. TEK (Texas Essential Knowledge) 3.8 (or state standard) states that students can make inferences and draw conclusions about structure and elements of fiction; use textual evidence to support.
Conduct Instructional Analysis
The second step of the model, conduct instructional analysis, requires the designers decide on what they expect learners to be able to recall or do in order to meet the goal of the ID process. This information derives from the lesson objectives which we are either given in online lessons created by the districts, in textbook lessons given by the districts, or created by educators who form new lessons in order to teach the students how to grasp the skills which are found in the states standards.

Analyze Learners and Contexts
In the third step of Dick, Carey and Carey’s model, the designers must take into account their audience. This requires them to gather information about previous experiences, demographics and prior skills. When focusing in on the goal skill itself, characteristics related to that skill must be known as well. Designers must take into environment in which the learners are working in. As a teacher is it our job to know and learn all that we can about our students throughout the year. We must learn about their backgrounds, previous performance in lower grades, and experiences they have outside of school among other things. All of this knowledge allows us to have a grasp on our target audience. To increase our knowledge in these areas we do things like student and parent surveys, go through students school records, and have discussions with the students to get know them as best as we can.
In our school district, students are given a benchmark test two times each year, once in the fall and once in the spring before they take the state assessment (ours is called the STAAR test) in April. The benchmark tests allow students to demonstrate their mastery of the subjects taught from the beginning of the school year up until the tests are administered. Once students have taken these tests, teachers must analyze the data based on the whole class, and the individuals’ strengths and weaknesses. As the analysis is carried out we teachers must take into account the following; what skills have been taught, how thoroughly the skills were taught, what background knowledge the students brought with them to the classroom, and what experiences the students have had with the content. As analysis takes place, a graphic organizer is completed as a way to document the students strengths which allows us to see areas in which a minimal amount of review is required. We also document the students weaknesses by writing down what we observe on their tests (based on the work they show) as well as what we have and have not taught in depth. 36% of the students in my class correctly answered the question related to the inferencing skill, the expectation is that 100% of the students are able to correctly answer the question.  Students were not showing the work they were originally taught to as they did these problems with the class (in whole group), and in small group (with guidance from the teacher). Students were not reading carefully and digging into the deeper meaning of the story, but rather looking at the surface information as their way to find answers the questions.

Write Performance Objectives
It is at this stage in the model that designers must create a description of the desired behavior, including the specific behavior, condition and criterion. It is these objectives which will allow the designers to be able to create their instruction and keep in mind the skills which will drive it. After analysis was complete, I decided to create my objectives based on the skill of inferencing, because it was an area of great weakness for a large majority of my class. Below are my written objectives;
-Students will be able to infer the meaning of a story based on the given story structure by correctly answering a multiple-choice question.  
-Students will be able to infer the meaning of a story based on the given story elements by correctly answering a multiple-choice question.
-Students will correctly draw conclusions based on their background knowledge and text clues when given a related multiple-choice question.

Develop Assessment Instruments
During this phase of the model, the designer must set the purpose for pre and post testing which will assist in the creation of the instructional instruments, activities and the formal and informal assessments to be carried out throughout the next few steps. When a pretest has been created, the designers will be able to assess where the students are in terms of what areas need a stronger focus, and which areas the students seem to have grasped. The post test will allow designers to create an assessment as a way of monitoring students progress once they have gone through the model at least once; if results aren’t achieved, revisions can be made and the process starts again. The goal is to achieve success, so this can continue as many times as necessary.
Teachers in each grade level work together as a way to be sure that what is being created will correlate with the weaknesses found in the analysis. Teachers in my specific grade level also meet with our curriculum specialists and administration to look over the data once again. As we meet we discuss the key concerns that will need to be integrated into our pre and post tests.

Develop Instructional Strategy
Designers must decide what activities will be set as a method of instruction for meeting the objectives set. Throughout the current unit the skills of inferring and drawing conclusions will be taught. As a whole group, the strategy of inferring and drawing conclusions will be retaught. Instruction will focus in on the reasoning for and the steps on how to use the strategy of inferring and drawing conclusions. Unless students are able to make a connection to the concept or find a reason for using the strategy it is more likely that they will not use it. In small groups, students will be given their tests to refer back to as we go through the inferencing questions they have missed. We will go over questions they have missed and discuss why they chose the answers they did, then focus on why the correct answer is in fact correct. Independently, students will practice inferencing and drawing conclusions multiple choice questions created by the teacher to go with their core reading stories for each week.  Students will also be given reading assessments at the end of each week consisting of one passage and multiple choice questions to go along with it. At least one of these questions will relate to inferencing and drawing conclusions. Each week I will be able to gauge the students progress with the skill based on these assessments.

Develop and Select Instructional Materials
            During this step of the model it is necessary for the designers to choose what materials they will use throughout the teaching process. They will need to decide what method of delivery will be best for their target audience; small group, whole group, teacher led, learner paced, learner centered, etc. Using the objectives, the designers must either locate or create the instruments which will be used.
            In order to allow our students to improve their skill of inferencing, we have chosen to provide instruction in multiple ways; small group, whole group and individual assessments, students will also be working with others in stations on this skill as well. To begin, we will reteach the strategy of inferencing. I will read a passage to the whole group and model how I can infer the meaning of either phrases or words found in the text. As we read to infer, the students must draw from their background knowledge (BK) and use the text clues (TC) to help them discover the meaning. After reading through the first half of the text in the whole group setting, students will then be asked to discuss their thinking first in a “turn and talk” format, then they will discuss it as a class by sharing their thoughts. As they are discussing their thinking I will redirect them to use the “BK + TC= Infer” formula. Once students have had practice (on at least two occasions) through modeling and discussion in a whole group setting, they will again be exposed to the strategy in a small group setting. When students are in small group the text will be leveled to their reading ability. Again, they will practice the BK + TC= Infer strategy, as they verbally discuss their thinking throughout the reading. Once we have read the story and complete discussion together, they will be given questions related to the text which will require them to show their thinking. Once they have completed the questions, we will discuss their answers and they will have the opportunity to change their answers based on our discussion. It is during this time that any correction or justifications will be made as well. Once all students have been met with in small group, they will be given an assessment to complete independently. This will be the first formal assessment which I will use as a way to determine what steps need to be revised or what additional instruction elements should be added as a way to help students grasp the chosen skill.

Design and Conduct Formative Evaluation of Instruction
            During this stage of the ID process, a formative evaluation will take place. This will allow the designers to see the students strengths and weaknesses, and allow them a starting point for revision in their instruction.
            The students will be given a reading assessment, which will consist of one reading passage and several multiple choice questions. At least one of these questions each week will test the student skills of inferencing and drawing conclusions. These assessments will allow me to see how they are doing on an individual basis with the two focus skills, which will allow me to revise and tweak my instruction to best meet their needs.  

Revise Instruction
            This is a very important step of the process in which designers must revise their instruction based on the difficulties their students had, if there is little to no progress, much revision must be made. If students made significant gains towards meeting the objective, instruction should be tweaked only in the areas causing difficulty. It is important that the designers decide not only how but who will revise the instruction.
Each week as I grade these assessments, I will be able to see either the students growth in regards to the skills we are currently focusing in on (inferencing and drawing conclusions). If students are not showing their work and using the strategy as expected, the following weeks assessment and instruction will need to be tweaked so that they will meet expectations.  When revisions are made, I will meed with my curriculum specialists, reading specialists and teammates for advice and guidance on how to best meet the needs of my students.

Design and Conduct Summative Evaluation
            At this point in the model, designers give students their final evaluation based on all of the revisions and assessments. The goal is that students will have shown several gains towards meeting the objectives set. Questions to be asked during relate to the effectiveness of the system in its entirety, if the instruction itself was effective, and how successful the students were at achieving the results set.
At the end of the current unit (which ends January 17) students will be given an assessment (similar to their end of week reading assessments).  Which will include several skills that they have been focusing on such as inferring and drawing conclusions. The students will be given multiple questions to test their use of the strategies they have worked on in small, independent, and whole group activities.

Blooms Taxonomy
Blooms Taxonomy was created as a guide to creating higher order thinking questions as a way to steer instruction from the basic level of memorization to more complex evaluation and analysis of content. Below are the outlined steps of his taxonomy, all of which are beneficial at points of instruction, depending upon the set objectives and desired outcome for the content being taught. Though these steps are not entirely connected, there is somewhat of a hierarchy requiring some steps to be mastered before others can be acquired. For example, students learning multiplication facts can start at the basic memory phase, but then as time moves on and content is taught it is a teachers hope that they will be able to analyze the skill and understand what is happening when we multiply a number by. Students could start by learning that 2 times 4 is 8, which would only require memorization. Once they have mastered all of their 2’s facts, students should start to notice that every time a number is multiplied by 2, the other number is being doubled. If students were able to do this, (though at a very basic level) they would be demonstrating both the steps of memorization as well as analysis. In order to transfer this into the application phase, students would be able to read a word problem on a test without given numbers, and apply the practice of doubling a number.
Ex: Tina has eight shells that she found at the beach. Her brother Josh has twice as many as Tina. How many shells did Josh find?
Memory
This type of questioning and learning deals with the basic memorization of information. Memorization is at the basic level of the taxonomy because it is the simplest form of learning. Situations in which my students learn at this level are through memorizing multiplication and division facts and remembering the name of all planets in order.
Comprehension
This level of the model occurs when students take information given either orally or through text, and are able to explain that information in their own words correctly. Times when students do so in my classroom are when they explain information they read or they are able to restate the meaning of stories they hear in class. 
Application
When application happens, students are able to take things they have previously learned and apply that knowledge to problems given. Example of times when students use this level of taxonomy are when they learn a strategy to solve problems in math, and are able to apply that knowledge in questions similar on tests and independent practice. When the application process takes place in math, the students show they work which allows others to see their thinking take place.
Analysis
When students properly analyze, they are able to take previously learned strategies and properly apply them to questions in order to help them solve the problem. Times when this is demonstrated by my students occurs when they are able to read a passage or a question and infer what is actually happening (thinking about the hidden meaning) in the problem or story. They are they able to apply their comprehension and application skills to help them answer any given questions. The student is able to take the information they read in the problem and separate what is indeed crucial to solving the problem, and what they can “throw out.” 
Synthesis
Students who can correctly synthesis are to read a text and answer questions “outside of the box,” which connect their own thoughts, prior experiences and background knowledge to the information presented in the text. An example of a time when students must synthesize information would be during a book study which they are currently working on, two of the questions required them to figure out (through inferring) whey two events happened in the story, and what the deeper meaning could be for these instances to take place. These questions required the students to form connections between their thoughts and the text in that the answer was not given to them.
Evaluation
Students are able to make judgments based on the information they learn; this step is similar to synthesis, but it takes the idea a step further. Students have to evaluate the context in which things happen in books they read. This allows them to again form connections between what they have read and their background knowledge, but they then have to make decisions based on the content given in various questions.

 References 

Instructional design models and methods . (2012). Retrieved from http://www.instructionaldesigncentral.com/htm/IDC_instructionaldesignmodels.htm

Bloom's taxonomy of learning domains. (2013). Retrieved from http://www.nwlink.com/~donclark/hrd/bloom.html

Gustafson , K. L., & Branch , R. M. (1997). Survey of instructional development models . (Third ed., p. 57). Syracuse, New York : Clearinghouse on Information & Technology DOI: Lohr, L. (1998). Using addie to design a web-based training interface Instructional Design , 1-7. Retrieved from http://files.eric.ed.gov/fulltext/ED421139.pdf

Kalman, H. K., Kemp, J. E., Morrison, G. R., Ross, S. M. (2011). Designing Effective Instruction (6th ed.). Hoboken, NJ; John Wiley and Sons Inc. 

Lohr, L. (1998). Using addie to design a web-based training interface. Instructional Design , 1-7. Retrieved from http://files.eric.ed.gov/fulltext/ED421139.pdf

Seddon, G. M. (1978). The properties of bloom's taxonomy of educational objectives for the cognitive domain .Review of Education Research 48(2), 303-323. Retrieved from http://ocw.metu.edu.tr/pluginfile.php/9012/mod_resource/content/1/1170087.pdf


As I was researching the various models of instructional design, these articles were most beneficial in enhancing my understanding of the two chosen models for this paper. Instructional design models and methods allowed me to compare the various models to one another which led me to the conclusion that Blooms and Dick, Carey and Carey’s models would be the best for me to focus in on. Blooms taxonomy of learning domains and the journal article by Seddon gave me further insight on Blooms taxonomy and allowed me to get a better grasp on how it falls under the category of instructional design.